Wednesday, 18 November 2026
Rīga TV

World and Latvian news in one place

AgriculturePublished: 18 November 2026 at 06:01

Massey Ferguson 8110: a gearbox synchroniser fault uncovered repairs across almost the whole tractor

At a Polish workshop, a Massey Ferguson 8110 brought in for trouble switching speed ranges turned out to have a string of serious faults once its gearbox was opened. The repair bill could reach tens of thousands of zlotys.

Foto: farmer.pl tehnika (Polija)

Polish agricultural machinery portal farmer.pl has described the repair of a Massey Ferguson 8110 tractor at a workshop. The 8110 is the smallest six-cylinder model in the manufacturer's 8100 series. The owner brought the tractor in with a fault: it would not shift into the slower range, known among farmers as the "tortoise–hare" switch. At first, a worn synchroniser, a typical problem for this design, seemed the likely cause. Once the gearbox was taken apart, however, far more damage came to light.

Gearbox damage

The tortoise–hare synchroniser was completely destroyed, with fragments lying at the bottom of the gearbox. Mechanics also found a seized bearing that badly damaged its seat in the powershift transmission basket, which therefore had to be replaced. In addition, the reverse synchroniser was worn, the handbrake was burnt out, the splines of the clutch shaft and its hub were worn down, and there were leaks around the power take-off (PTO) shaft.

The front drive attachment was also seriously damaged: its housing was worn so badly that the bushings no longer sat correctly. Mechanics replaced it with a used unit. One part was unavailable and had to be made from scratch. By the time of filming the gearbox had been repaired, but the workshop was still waiting for front-drive parts.

Makeshift repairs on the front axle

Inspection of the front axle showed that someone had repaired it before, but not always properly. One example was a roughly one-centimetre piece welded onto the pinion shaft connection so that it would keep transmitting power. Dismantling was made harder by very strong adhesive, so parts had to be heated with a torch and cut apart.

Is a used 8100 series worth buying?

Mechanic Mariusz Zdanowski stresses that the Perkins engine is very durable, and in this case it needed no repair. The full repair cost was not stated in the interview, but the number of parts, the custom fabrication and the amount of work suggest a bill of up to several tens of thousands of zlotys. He advises a comprehensive inspection of older tractors during any major repair. Even a careful check cannot reveal every hidden defect.

The Massey Ferguson 8100 series was built from 1995 to 1999. The MF 8110, with a 135 hp turbocharged Perkins engine and a Dynashift gearbox offering 32 forward and 32 reverse ratios, weighs 5,780 kg.

Comments

0/1500

Comments are automatically moderated. No hate, threats, personal data or spam.

Loading comments…

More in this category