DJI releases new firmware update for Matrice 4 series drones
DJI, the Chinese drone maker, has issued a new firmware update for its Matrice 4E and Matrice 4T enterprise drones. It includes regulatory-related changes and bug fixes.
DJI, the drone manufacturer, has released a new firmware update for its compact Matrice 4 enterprise drone series. The update applies to the Matrice 4E and Matrice 4T models, their remote controller and several compatible accessories. It brings regulation-related changes and general bug fixes.
DJI has not specified which regional regulations the new features address, so professional operators need to check the firmware requirements that apply in their own location.
New versions
The updated aircraft firmware is version 19.01.00.07, while the DJI RC Plus 2 Enterprise remote controller receives 19.01.00.08. New versions are also available for the DJI AS1 speaker (v01.00.01.11), the AL1 spotlight (v01.00.29.85), the D-RTK 3 positioning unit (v17.01.05.02) and the DJI O4 Ground Station (v19.01.00.58). On the software side, the DJI Pilot 2 app moves to version 19.1.0.45, and DJI Assistant 2 to 2.1.20.
About the Matrice 4 series
The Matrice 4 series was launched in January 2025 with two models. They are designed for demanding professional tasks: public safety, search and rescue, power-line inspection, surveying, construction and emergency response. Both carry a multi-camera system with a 48 MP medium telephoto camera, a 48 MP telephoto camera and a laser rangefinder that measures distances of up to 1,800 metres. They also offer AI-based detection, omnidirectional obstacle sensing and improved night-flight capabilities.
The Matrice 4T additionally has a 640 × 512 thermal camera and an infrared auxiliary light, useful at night, for locating missing people and for spotting heat signatures in firefighting. The Matrice 4E is aimed at surveying and mapping, with a 20 MP 4/3-inch wide-angle camera, a mechanical shutter and the ability to shoot at 0.5-second intervals.
Installation advice
DJI recommends fully charging both the aircraft and the remote controller before updating. After installation, both devices should be restarted and operators should make sure DJI Pilot 2 is on the latest version. If an update fails, the aircraft and controller should be restarted and the software updated before trying again.


