Tuesday, 17 November 2026
Rīga TV

World and Latvian news in one place

HealthPublished: 17 November 2026 at 08:02

Chemist recommends citric acid, not vinegar or baking soda, for limescale in the bathroom

Nathan Keel, a chemistry lecturer at the University of Tasmania, says citric acid is best for dissolving limescale. Baking soda is unsuitable, and vinegar may act too slowly.

Foto: NRA

Limescale deposits on taps, shower heads and toilet bowls are a common bathroom cleaning problem. According to the portal Futura Sciences, Nathan Keel, a chemistry lecturer at the University of Tasmania in Australia, says citric acid is more effective against such deposits than vinegar or baking soda.

Why baking soda and vinegar fall short

Dissolving limescale requires an acid. Baking soda is alkaline, with a pH of about 8, and does not dissolve limescale, whose main component is calcium carbonate. Vinegar has a pH of about 2–3 and does act on deposits, but cleaning can take a long time when the layers are thick and have built up over a long period.

The popular mix of baking soda and vinegar is also less effective than it appears. The reaction releases carbon dioxide and creates foam, but the acid and the alkali partly neutralise each other, so the cleaner becomes weaker.

How to use citric acid

When citric acid meets calcium carbonate, it triggers a reaction that turns the deposits into more soluble compounds that are easier to wipe away.

For a toilet bowl, dissolve four tablespoons of citric acid in 500 millilitres of hot water. Pour the liquid onto the inner walls of the bowl, paying special attention to the area under the rim, leave it for 30–60 minutes, then scrub with a toilet brush and rinse.

For taps, a weaker solution is needed: one or two tablespoons per 500 millilitres of hot water. Removable parts can be placed in the solution, while fixed areas can be wrapped in a cloth soaked in it. All surfaces should then be rinsed thoroughly. Before use, check that the tap manufacturer allows such a cleaner, especially for decorative coatings and sensitive surfaces.

Safety warnings

Citric acid must never be mixed with bleach or products containing sodium hypochlorite, as this can release toxic chlorine gas, which is dangerous to inhale and can seriously damage the airways. It should also not be used on marble or limestone surfaces, which react with acids, so their structure may be damaged and lasting stains left. Before using any homemade cleaner, make sure it is suitable for the surface in question.

Comments

0/1500

Comments are automatically moderated. No hate, threats, personal data or spam.

Loading comments…

More in this category